Autoclave Sterilization Equipment

Product Details:

Construction:

• Double Walled Unit
• Inner Chamber of 18 SWG Stainless Steel sheet of 304 Grade
• Stainless Steel Basket of grade 304
• Outer Chamber of Thick Mild Steel Sheet duly pre treated with primers for rust proofing & elegantly painted with long lasting powder coating paint
• Autoclaves are air insulated from inside, however optionally we can incorporate mineral glass wool insulation against specific requirement
• Lid is fabricated out of thick Mild Steel Plate with Stainless Steel lining from inside for Double protection. Lid of the autoclave is fitted with Pressure Gauge & Spring Loaded safety Valve
• Incorporated with user friendly heavy duty Radial Locking arrangement as a safety feature
• Complete with Pressure Release Valve, Water Level Indicating Glass Gauge, Stainless Steel basket & Drain Valve to facilitate easy cleaning of the chamber

Mode Of Heating:

• Electrically heated by specially designed flange type/Immersion type Heating Elements of suitable wattage bearing ISI Mark/Equivalent Quality Mark, so as to ensure optimum sterilization in every sterilization cycle
• Suitable to work on 220/230 volts single phase 50 Hertz, AC supply

Salient Features:

• Double Safety Radial Locking system of Mild Steel duly chrome plated
• Heavy duty Mild Steel Ring elegantly painted/chrome plated
• Moulded joint less Neoprene Rubber Gasket
• Brass Steam Release Valve
• Spring Loaded Safety Valve, Extra Safety Valve as an additional feature
• Water Outlet Valve
• Water level Indicating Gauge Glass with metal guard
• Pressure Gauge
• Electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve
• Foot operated user friendly Paddle Lifting device

Technical Specification:

• Inner Size (Dia x Height): 250 x 450 mm, 300 x 500 mm, 350 x 550 mm, 450 x 600 mm, 550 x 750 mm

Additional Information:

Item Code: AM50001

Product Details:

Construction:

• Double Walled Unit Inner Chamber of 18 SWG Stainless Steel sheet of 304 Grade
• Stainless Steel Basket of grade 304
• Outer Chamber of Stainless Steel 304 Grade
• Lid is also of thick Stainless Steel Plate
• Autoclaves are air insulated from inside, however optionally we can incorporate mineral glass wool insulation against specific requirement
• Lid of the autoclave is fitted with Pressure Gauge & Spring Loaded safety Valve
• Incorporated with user friendly heavy duty Radial Locking arrangement as a safety feature

Mode Of Heating:

• Electrically heated by specially designed flange type/Immersion type Heating Elements of suitable wattage bearing ISI Mark/Equivalent Quality so as to ensure optimum sterilization time in every sterilization cycle
• Suitable to work on 220/230 volts single phase 50 Hertz, AC supply

Salient Features:

• Automatic Pressure Control Device
• Double Safety Radial Locking system of Mild Steel (MS) duly chrome plated
• Heavy duty MS Ring elegantly painted/chrome plated
• Molded joint less Neoprene Rubber Gasket
• Vacuum Breaker as an additional safety feature
• Brass Steam Release Valve
• Spring Loaded Safety Valve, Extra Safety Valve as an additional feature
• Water Outlet Valve
• Water level Indicating Gauge Glass with metal guard
• Pressure Gauge

Additional Information:

Item Code: AM50004

Product Details:

Salient Features:

• Automatic Pressure Control Device
• Auto Low water level cut of device
• Double Safety Radial Locking system of MS duly chrome plated
• Heavy duty MS Ring elegantly painted/chrome plated
• Molded joint less Neoprene Rubber Gasket
• Vacuum Breaker, Brass Steam Release Valve, Spring Loaded Safety Valve
• Water Outlet Valve, Water level Indicating Gauge Glass with metal guard
• Pressure Gauge
• Electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve
• Foot operated user friendly Paddle Lifting device

Advanced Features:

• Microprocessor based Digital Autoclave Controller with Alpha Numeric Display (Feather touch controls)
• Digital Display of Temperature & Timer
• Temperature Settable
• Sterilizing time Cycle settable

Technical Specifications:

• Inner Size (Dia x Height) 250 x 450 mm, 300 x 500 mm, 350 x 550 mm, 450 x 600 mm, 550 x 750 mm

Additional Information:

Item Code: AM50006

Product Details:

Construction:

• Double Walled Unit
• Inner Chamber of thick Stainless Steel sheet of 304 Grade
• Stainless Steel tray/Shelf of grade 304
• Outer Chamber of Thick Mild Steel Sheet duly pre treated with primers for rust proofing & elegantly painted with long lasting powder coating paint(In Standard Model)/Outer chamber of Stainless Steel (Deluxe Model)
• Lid is also of thick Mild Steel Plate with Stainless Steel lining from inside for Double protection(In Standard Model)/ Stainless Steel Lid (Deluxe Model)
• Heavy duty MS Ring elegantly painted/chrome plated
• Incorporated with user friendly heavy duty Radial Locking arrangement
• Whole unit mounted on a robust tubular Iron stand

Working Pressure:

• Pressure Range: Pressure inside the chamber is variable from 5 psi to 20 psi
• The normal recommended pressure for sterilization process is 1.2 Kg/cm2 (15psi- 17 psi)
• Working Pressure: 15 psi+2/3 ps

Technical Specification:

• Inner Size (Dia x Height): 250 x 450 mm, 300 x 500 mm, 350 x 550 mm, 450 x 600 mm, 550 x 750 mm, 400 x 1100 mm

Additional Information:

Item Code: AM50007

Product Details:

Description:

Triple Walled Autoclaves (Vertical) are for most suitable for Dry sterilization cycle requirement in labs. Triple walled vertical autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory applications where dryness of the sterilized medium is of utmost importance. Highly useful for meeting sterilizing needs of Scientific Research Institutions, Hospitals, Pharmaceutical Laboratories, Tissue culture Labs, Mushroom Centers, Bio-fertilizer Laboratories and Institutes requiring sterilization of culture media, glassware, Dressing material, utensils, surgical instruments, Lab ware etc. in steam under pressure or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms.

Construction:

• Triple Walled Unit
• Inner Chamber of thick Stainless Steel sheet of 304 Grade, Steam Jacket/Middle Chamber of Stainless Steel grade 304
• Outer Chamber of Stainless Steel 304 Grade
• Lid is also of thick Stainless Steel Plate
• Lid of the autoclave is fitted with Pressure Gauge & Spring Loaded safety Valve
• Incorporated with user friendly heavy duty Radial Locking arrangement as a safety feature
• Complete with Pressure Release Valve, Water Level Indicating Glass Gauge, Stainless Steel basket & Drain Valve to facilitate easy cleaning of the chamber

Additional Information:

Item Code: AM50005

Product Details:

Construction:

• Double Walled Unit
• Inner Chamber of 18 SWG Stainless Steel sheet of 304 Grade
• Stainless Steel Basket of grade 304
• Outer Chamber of Stainless Steel 304 Grade
• Lid is also of thick Stainless Steel Plate
• Ring is also made of thick Stainless steel
• Radial locking system also made of Stainless Steel bars
• Autoclaves are air insulated from inside, however optionally we can incorporate mineral glass wool insulation against specific requirement
• Lid of the autoclave is fitted with Pressure Gauge & Spring Loaded safety Valve

Salient Features:

• Double Safety Radial Locking system of Mild Steel duly chrome plated
• Moulded joint less Neoprene Rubber Gasket
• Brass Steam Release Valve
• Spring Loaded Safety Valve, Extra Safety Valve as an additional feature
• Water Outlet Valve
• Water level Indicating Gauge Glass with metal guard
• Pressure Gauge
• Electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve
• Foot operated user friendly Paddle Lifting device

Working Pressure Temperature:

• Pressure Range: Pressure inside the chamber is variable from 5 psi to 20 psi
• The normal recommended pressure for sterilization process is 1.2 Kg/cm2 (15 psi-17 psi)
• Working Pressure:15 psi+2/3 psi, Working Temperature: 121° C approximately (However optionally against specific requirements we are in a position to upgrade autoclaves to be used for up to 134° C)
• Working pressure for our standard model vertical autoclave is 15 psi, however this can also be upgraded to be used for higher pressures of up to 25/30 psi

Additional Information:

Item Code: AM50003

Product Details:

Construction:

• Double Walled Unit
• Inner Chamber of 18 SWG Stainless Steel sheet of 304 Grade
• Stainless Steel Basket of grade 304
• Outer Chamber of Stainless Steel 304 Grade
• Lid is also of thick Stainless Steel Plate
• Autoclaves are air insulated from inside, however optionally we can incorporate mineral glass wool insulation against specific requirement
• Lid of the autoclave is fitted with Pressure Gauge & Spring Loaded safety Valve
• Incorporated with user friendly heavy duty Radial Locking arrangement as a safety feature

Salient Features:

• Double Safety Radial Locking system of Mild Steel duly chrome plated
• Heavy duty Mild Steel Ring elegantly painted/chrome plated
• Moulded joint less Neoprene Rubber Gasket
• Brass Steam Release Valve
• Spring Loaded Safety Valve, Extra Safety Valve as an additional feature
• Water Outlet Valve
• Water level Indicating Gauge Glass with metal guard
• Pressure Gauge
• Electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve
• Foot operated user friendly Paddle Lifting device

Additional Information:

Item Code: AM50002

Product Details:

Description:

Horizontal Autoclaves have a wide application & are most suitable for Dry sterilization requirement in labs. Triple walled Horizontal autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory applications where dryness of the sterilized medium is of utmost importance or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms.

Advance Feature:

• Microprocessor Based Controller
• Digital Display of Temperature & Timer
• Incorporated with Micro Processor based Digital Temperature Controller Cum Indicator with built in Timer
• When the SET Temperature is achieved, the Timer starts working & on completion of Set Time, stops the cycle automatically & an Audio Alarm/Buzzer (optional) goes ‘on’ so as to alert the user.
• The steam is to be released manually by opening the steam release valve

Technical Specification:

• Inner Dim (Dia x Height): 400 x 600 mm, 450 x 600 mm, 550 x 750 mm, 400 x 1100 mm, 500 x 900 mm, 500 x 1200 mm

Additional Information:

Item Code: AM50009

Product Details:

Construction:

• Triple Walled Unit
• Inner Chamber of Thick Stainless Steel sheet of 304 Grade, Steam/Middle jacket of Stainless Steel grade 304
• Outer Chamber of Stainless Steel 304 Grade, Lid is also of thick Stainless Steel Plate
• Working Pressure/Working Temperature
• Pressure Range: Pressure inside the chamber is variable from 5 psi to 20 psi
• The normal recommended pressure for sterilization process is 1.2 Kg/cm2 (15 psi-17 psi)
• Working Pressure: 15 psi+ 1/2 psi, Working Temperature:121°C approximately

Salient Features:

• Three Way Valve/Multiple operating Valve: Facilitates functions of sterilization cycle at one point i.e from Boiler to Steam Jacket, Jacket to chamber & Chamber to release position or exhaust
• Stainless Steel Heavy Gauge Steam Generator (Boiler): Incorporated underneath the chamber & is fitted with:
• ISI Marked/Equivalent Quality Immersion type Heating Elements
• Automatic Pressure control Switch
• Auto Low Water Level Cut off Device
• Water Inlet & Outlet Valves
• Water Level indicating glass gauge, Pressure gauge
• Door (Lid): Thick Stainless Steel Lid with Double Safety Radial Locking system of MS duly chrome plated
• Gasket: Incorporated with Moulded joint less Neoprene Rubber Gasket/Silicon Rubber Gasket(optional)
• Vacuum Breaker : A Safety device to prevent vacuum formation in the chamber & to remove residual air
• Moisture/Steam Trap/Chamber Condensate: Incorporated with a steam trap and check valve for perfect condensation from chamber to achieve optimum temperature
• Spring Loaded Safety Valve
• Pressure & Compound Gauge

Additional Information:

Item Code: AM50010

Product Details:

Description:

Double Door Autoclaves have wide application & are most suitable for Dry sterilization requirement in labs. Triple walled Horizontal autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory application where dryness of the sterilized medium is of utmost importance or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms.

Advanced Features:

• Microprocessor based Digital Autoclave Controller with Alpha Numeric Display (Feather touch controls)
• Digital Display of Temperature & Timer
• Temperature Settable
• Sterilizing Cycle time settable

Additional Information:

Item Code: AM50011

Product Details:

Description:

Horizontal Autoclaves have a wide application & are most suitable for Dry sterilization requirement in laboratories. Triple walled Horizontal autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory applications where dryness of the sterilized medium is of utmost importance. Highly useful for meeting sterilizing needs of Scientific Research Institutions, Hospitals, Pharmaceutical Laboratories, Tissue culture Labs, Mushroom Centers, Bio-fertilizer Laboratories and Institutes requiring sterilization of culture media, glassware, Dressing material, utensils, surgical instruments, Lab ware etc. in steam under pressure or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms.

Working Pressure:

• Pressure Range: Pressure inside the chamber is variable from 5 psi to 20 psi
• Incorporated with semi Automatic Pressure control switch
• The normal recommended pressure for sterilization process is 1.2 Kg/cm2 (15 psi)
• Working Pressure: 15 psi + 1/2 psi, Working Temperature: 121 deg C (approx)

Additional Information:

Item Code: AM50008

Product Details:

Applications of Vertical Autoclave Triple Walled:

• Triple walled High Pressure Autoclave are used where Dry Sterilization is required.
• Triple walled High Pressure Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms
• It is used for sterilizing of surgical instruments, dressing material, linen, rubber, plastic material, injection liquids by means of steam under pressure of 15 to 20 psi. (adjustable).

Salient Features & Construction of Vertical Autoclave Triple Walled:

• Used for Dry Sterilization
• Steam Jacket & Outer wall made of S. S. 304 Grade
• Water Level Indicator
• Lid Closing by Radial Locking System
• Sealing of Lid by Neoprene Rubber Gasket
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
• Operating range from 15psi to 20psi pressure
• Hydraulically Tested up to 40 psi.
• Sterilizing Temperature up to 1340C
• Tested up to 2.5 times of required Pressure
• Voltage: 220 Volts AC (50 Hz)

Additional Information:

Item Code: AM-7004

Product Details:

Applications of Vertical Autoclave :

• Autoclave Vertical are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms
• Autoclave Vertical is low cost options for general sterilization ideal tool for Laboratories, Hospitals, Nursing Homes, R&D labs etc, Pharmaceutical, Food & Beverage Industries and Institutions

Salient Features & Construction of Vertical Autoclave :

• Inner & Outer Chamber, constructed from S. S. 304 Grade
• Bucket / Basket Made of Stainless Steel
• Water Level Indicator
• Lid Closing by Radial Locking System
• Sealing of Lid by Neoprene Rubber Gasket
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
• Operating range from 15psi to 20psi pressure
• Sterilizing Temperature up to 1340C
• Tested up to 2.5 times of required Pressure
• Voltage: 220 Volts AC (50 Hz)

Additional Information:

Item Code: AM-7001

Product Details:

Salient Features & Construction of Fully Automatic Vertical Autoclave :

• Inner & Outer Chamber, constructed from S. S. 304 Grade
• Bucket / Basket Made of Stainless Steel
• Water Level Indicator
• Lid Closing by Radial Locking System
• Sealing of Lid by Neoprene Rubber Gasket
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
• Operating range from 15psi to 20psi pressure
• Sterilizing Temperature up to 1340C
• Tested up to 2.5 times of required Pressure
• Fully automatic models requiring no human intervention till a full sterilization cycle is over.
• Fitted with a (Programmable Logic Controller) LCD Display with respect to time and temperature.
• Enabling user automatic purging of stale air.
• Sterilizing hold time system for sterilizing period and cycle end.
• Automatic exhaust of pressure.
• Audio alarm/ buzzer is raised at the end of the cycle on.
• Voltage: 220 Volts AC (50 Hz)

Additional Information:

Item Code: AM-7002

Product Details:

Applications of Horizontal Autoclave :

• Double walled Horizontal Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms It is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through.
• Autoclave Horizontal is low cost options for general sterilization ideal tool for Laboratories, Hospitals, Nursing Homes, Agricultural R&D labs etc, Pharmaceutical, Food & Beverage Industries and Institutions.
• Suitable for Sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glasswares, utensils etc.

Salient Features & Construction of Horizontal Autoclave :

• Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted or Stainless steel tubular stand.
• Chamber & Boiler (Steam Generator) are constructed from S.S. 304 Grade.
• Lid (single piece door) made of stainless steel tightened by Radial Locking System.
• Sealing of Lid by Neoprene Rubber Gasket
• Chamber Insulated by Mineral/Glass Wool to minimise the heat losses and is covered by polished stainless steel sheet.
• Fitted with pressure gauge, safety valve and steam release valve.
• Sterilizing Temperature up to 1340C.
• Sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi)
• Hydraulically Tested up to 40 psi.
• These Autoclaves work on the principle of downward displacement of air which is the most economical method of obtaining sterilization
• Fitted with separate valves for injecting the steam into the main chamber.
• Fitted with Automatic Vacuum Breaker to break the vacuum in case of formation of vacuum due to steam condensation.
• Fitted with Automatic Low Water Level Cut-off Device for Prevention of Heaters.
• Fitted with Automatic Pressure Control Switch to economizes power consumption by reducing frequent opening of the steam release valve. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point.
• Fitted with Dial thermometer to indicate the inner chamber temperature.
• Voltage: 220 Volts AC (50 Hz).

Additional Information:

Item Code: AM-7005

Product Details:

Salient Features & Construction Of Vertical Autoclave GMP Model :

• Complete Model Made of S. S. 304 Grade
• Lid Made of Stainless Steel 304 Grade
• Bucket / Basket Made of Stainless Steel
• Water Level Indicator
• Lid Closing by Radial Locking System
• Sealing of Lid by Neoprene Rubber Gasket
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
• Operating range from 15psi to 20psi pressure
• Sterilizing Temperature up to 1340C
• Tested up to 2.5 times of required Pressure
• Voltage: 220 Volts AC (50 Hz)

Specifications:

Additional Information:

Item Code: AM-7003

Product Details:

Applications of Horizontal Cylindrical Steam Sterilizer :

• Robust and rigid construction.
• Triple walled Horizontal Autoclaves (for Dry Sterilization Steam Jacket & Separate Boiler) are most ideal for bulk sterilization requiring assured and reliable total destruction of all living micro-organisms.
• Triple walled Horizontal Autoclaves is ideal tool for Laboratories, Hospitals, Nursing Homes, Agricultural R&D; labs etc, Pharmaceutical, Food & Beverage Industries and Institutions.
• Suitable for Sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glassware, utensils etc.

Salient Features & Construction of Horizontal Cylindrical Steam Sterilizer :

• These Autoclaves workon the principle of downward displacement of air which is the most economical method of obtaining sterilization.
• Triple walled with steam jacket and separate boiler is made up of Heavy gauge S.S. Sheet (304 grade) argon-arc welded.
• Whole unit horizontally mounted on a sturdy, heavy M.S. duly painted or Stainless steel tubular stand.
• Lid (single piece door) made of stainless steel tightened by Radial Locking System which cannot be opened when under pressure. The self-locking device automatically disengages the thread mechanism when the sterilizer is under pressure to preclude any eventuality of accident
• Sealing of Lid by Neoprene Rubber Gasket.
• Sterilization cycle is controlled by single point multi port valve fitted at front top. Pressure gauges are fitted to read jacket & chamber pressure on the top A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening in the chamber.
• Chamber Insulated by Mineral/Glass Wool to minimize the heat losses and is covered by polished stainless steel sheet.
• Fitted with pressure gauge, safety valve and steam release valve.
• Fitted with plug screen to prevent the discharge line from choking.
• Fitted with Automatic Vacuum Breaker to break the vacuum in case of formation of vacuum due to steam condensation.
• Fitted with Automatic Low Water Level Cut-off Device for Prevention of Heaters.
• Fitted with Automatic Pressure Control Switch to economizes power consumption by reducing frequent opening of the steam release valve. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point.
• Fitted with Dial thermometer to indicate the inner chamber temperature.

Additional Information:

Item Code: AM-7006

Product Details:

Applications of Portable Autoclave :

• Portable Autoclave is low cost device for general sterilization ideal for doctors, nursing homes, laboratories, dentists etc.
• Mainly used as general laboratory equipment where samples in small batches are required to be sterilized.
• Light weight & easy to carry.

Salient Features & Construction of Portable Autoclave :

• Available Electrically / Gas Heated, Single walled, (joint less body) complete with Stand in Aluminum & Stainless Steel Models.
• Hydraulically tested upto 40 psi for user safety.
• Spring loaded safety valve for pressure adjustment and a dead weight valve works as a safety device.
• Wing Type Simple and easy "Press & turn" system of closing lid for single walled units.
• Lid is fitted with pressure gauge, safety valve and manual exhaust valve.
• Vacuum breaker-cum-purge valve works as a safety device.
• Moulded neoprene rubber gasket.

Additional Information:

Item Code: AM-7008

Product Details:

Salient Features & Construction Of Portable Autoclave Pressure Cooker Type

• Unbeatable combination of quality, performance and value.
• Easily operate anywhere, anytime.
• Light weight & easy to carry.
• Available Electrically / Gas Heated, Single walled, (joint less body) complete with Stand in Aluminum deep drawn Seamless construction & Stainless Steel Models.
• Stylish, Light, Compact, Portable Easy to use top loading autoclaves.
• Fast 25 min. Sterilizing cycle at 1210 C.
• Hydraulically tested up to 40 psi for user safety.
• Spring loaded safety valve for pressure adjustment and a dead weight valve works as a safety device.
• Lid is fitted with pressure gauge, safety valve and manual exhaust valve.
• Vacuum breaker-cum-purge valve works as a safety device.
• Lid Closing by Press & Turn System.
• Molded neoprene rubber gasket.
• Extended life Lid Gasket and Heating Element.
• Pressure Gauge show internal chamber condition during the cycle.

Specification:

Additional Information:

Item Code: AM-7009

Product Details:

Autoclave are widely used in industrial, Medical research, Hospital , Diagnostic applications. Triple walled construction, all the three walls are made of thick high grade stainless steel sheet of SS-304 grade. The lid is made of stainless steel sheet. The unit is fitted with radial locking system with paddle lifting device, made of MS chrome plated. Provided with built- in safety valve, pressure gauge, pressure release valve and water level indicator. The pressure is adjustable from 5 psi to 20 psi with automatic pressure control switch, which controls the pressure with an accuracy of +/- 1 psi. Supplied complete with stainless steel basket, chord and plug.

The pressure inside the chamber is variable from 5 psi. To 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g
( 15 psi - 17 psi )
Working Temperature : 121° C
Hydrotest Pressure : 2.5 kgf/cm sq.g ( 35 psi )

Additional Information:

Item Code: AM-7010

Product Details:

Applications of High Pressure Rectangular Horizontal Sterilizer :

• Robust and rigid construction.
• Rectangular Horizontal High-Pressure Steam Sterilizer is Specially designed for Sterilization of Regulated Bio-Medical Hospital Waste and related spores. It is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through.
• Rectangular Horizontal High-Pressure Steam Sterilizer is ideal tool for Hospitals & Nursing Homes.

Salient Features & Construction of High Pressure Rectangular Horizontal Sterilizer :

• These Sterilizers work on the principle of downward displacement of air which is the most economical method of obtaining sterilization.
• Triple walled with inner chamber and separate boiler is made up of Heavy gauge non magnetic S.S. Sheet argon-arc welded and jacket is made out of rolled steel.
• Boiler Made of thick stainless steel fitted under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves provided with Low Water Level cut off device.
• Whole unit horizontally mounted on a sturdy, heavy M.S. duly painted or Stainless steel tubular stand.
• Lid made out of rolled steel lined with S.S. sheet on both sides tightened by Radial Locking System which cannot be opened when under pressure. The self-locking device automatically disengages the thread mechanism when the sterilizer is under pressure to preclude any eventuality of accident.
• Sealing of Lid by Neoprene Rubber Gasket.
• Fitted with shelf locking safety device.
• Sterilization cycle is controlled by single point multi port valve fitted at front top. Pressure gauges are fitted to read jacket & chamber pressure on the top A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening in the chamber.
• Chamber Insulated by Mineral/Glass Wool to minimize the heat losses and is covered by polished stainless steel sheet.
• Fitted with pressure gauge, safety valve and steam release valve.
• Fitted with plug screen to prevent the discharge line from choking.
• Drain valve is fitted at the side bottom for easy draining/cleaning.
• Fitted with Digital Temperature Indicator.
• Fitted with Automatic Vacuum Breaker to break the vacuum in case of formation of vacuum due to steam condensation.
• Fitted with Automatic Low Water Level Cut-off Device for Prevention of Heaters.
• Supplied with Heavy Duty Vacuum Pump (Optional) for vacuum steam pulsating model.
• Fitted with Automatic Pressure Control Switch to economizes power consumption by reducing frequent opening of the steam release valve. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point.
• Control panel fitted with Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.

Additional Information:

Item Code: AM-7007

Description:

• High Grade strong Stainless Steel, Triple walled construction
• Positive radial self-locking safety doors
• Complete sterilizing cycle is controlled by means of Multiport Valve
• Hydrostatically tested to withstand 2.5 times the working Pressure
• Sealed with Neoprene/Silicon long-lasting and durable

Additional Information:

Item Code: AM-7012

Product Details:

Description:

Rectangular Autoclaves (Triple walled) have wide application & are most suitable for Dry sterilization requirement in labs. Triple walled Horizontal Rectangular Autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory application where dryness of the sterilized medium is of utmost importance. 

Salient Features:

• Three Way Valve/Multiple operating Valve: Facilitates functions of sterilization cycle at one point i.e from Boiler to Steam Jacket, Jacket to chamber & Chamber to release point or exhaust
• Stainless Steel Heavy Gauge Steam Generator (Boiler): Incorporated underneath the chamber & is fitted with:
• ISI Marked/Equivalent Quality Immersion type Heating Elements
• Automatic Pressure control Switch
• Auto Low Water Level Cut off Device
• Water Inlet & Outlet Valves
• Water Level indicating glass gauge
• Pressure gauge
• Door: Stainless Steel Lid with Double Safety Radial Locking system of MS duly chrome plated
• Gasket: Incorporated with Molded joint less Neoprene Rubber Gasket/Silicon Rubber Gasket(optional)
• Vacuum Breaker: A safety device to prevent vacuum formation in the chamber & to remove residual air
• Moisture/Steam Trap/Chamber Condensate: Incorporated with steam trap and check valve for perfect condensation from chamber to achieve optimum temperature
• Spring Loaded Safety Valve

Additional Information:

Item Code: AM50012

Product Details:

Construction:

Cement Autoclave is a Double Walled Unit. Outer Body Of The Autoclave Is Constructed Out Of Thick Mid Steel Sheet/PRC Sheet Duly Pretreated With Primers For Rust Proofing And Painted With Long Lasting Powder Coated Paint. The Inner Cylinder Is Made Of Heavy Gauge Welded Steel Sheet With An Insulated Cover Mounted On A Supporting Frame.

Control Panel:

Control Panel Comprises Of Pressure Regulator, Pressure Gauge, Pilot /Neon Indicators & Power Switches To Control The Heating Unit

Additional Information:

Item Code: AM50013

Product Details:

Description:

• Double Safety Radial Locking system of Mild Steel duly chrome plated
• Incorporated with Molded joint less Neoprene Rubber Gasket/Silicon Rubber Gasket (optional)
• Heavy duty Mild Steel Ring elegantly painted/chrome plated
• Brass Steam Release Valve
• Spring Loaded Safety Valve
• Water Outlet Valve, Water level Indicating Gauge Glass with metal guard
• Pressure Gauge
• Electrical control box, fitted with Microprocessor based Digital Autoclave Controller, toggle switch, indicating Neon lamps and steam release valve

Advanced Features:

• Microprocessor based Controller with Alpha Numeric Display feather touch controls
• Digital Display of Temperature & Timer
• Temperature Settable
• Sterilizing time settable

Additional Information:

Item Code: AM50014

Product Details:

Feature:

• Unit is incorporated with State of art latest Electronic Circuit with Programmable Integrated Circuit chip
• Digital Display of operation
• Front control panel with feather Touch keys
• Sealing Ring made of Silicon Rubber
• Front Door & panel is made of heat resistant plastic and top cover is made of stainless steel
• Capacity : 12 Liters
• Suitable to operate on 220/230 V, 50 Hertz, AC supply

Additional Information:

Item Code: AM50015

Product Details:

The Autoclaves are sturdily constructed in rustproof, heavy gauge aluminum for use in rugged condition. Its a unique vessel that generates steam under pressure and temperature between 120°C to 125°C.

Features

• All aluminum deep drawn seamless construction.
• Equipped with two stages over pressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve.
• Extended life gasket and heating element
• Equipped with heat resistant handles and steam release or control valve.
• For assurance of quality each autoclave is tested to the parameter of successful sterilization.
• Light, compact, portable, easy to use top loading autoclaves.

Additional Information:

Item Code: AM-7011