Cleanroom Equipment

Product Details:

Applications of Fume Hood :

• Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.
• It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.

Salient Features & Construction of Fume Hood :

• Low Cost.
• Low Noise.
• User Friendly Ergonomic Design.
• Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel.
• All interior surfaces are sealed and checked for leakage.
• Work table is made of Stainless Steel (SS-304) and is fitted with a small S.S. sink with water tap connections.
• Working area is illuminated by fluroescent lighting fitted to the unit.
• The front door moves vertically up and down with concealed counter balanced weight.
• The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
• Height of the working table provides comfortable sit down working position for the operator.
• The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.

Additional Information:

Item Code: AM9004

Product Details:

Applications of Biosafety Cabinet :

• BIOSAFE BIOLOGICAL SAFETY CABINET Class III exhaust 100% of air in the cabinet.
• Biosafety Cabinet is used to protect personel, product and the environment from exposure to biohazards and cross contamination during routine procedures.
• Biosafety cabinets are used for various applications in the life science, clinical, pharmaceutical and industrial laboratory.
• These Biosafety Cabinets are designed to provide 3 basic types of protection.
• Personnel protection from harmful agents inside the cabinet.
• Product protection to avoid contamination of the work, experiment or process.
• Environment Protection

Salient Features & Construction of Biosafety Cabinet :

• Low Cost.
• Low Noise.
• User Friendly Ergonomic Design.
• Controlled Environment Particulate Free Product Protection.
• Work area surrounded by negative pressure, double wall plenums for protection.
• Aerodynamic designed airflow grille maintains safety by preventing blockage.
• Silent Vibration-Free Blower ensure noiseless operation.
• Sound level no more than 65 dbA.
• The Unit is suitable for CLASS 100 conditions.
• 100% of the air is re-circulated through the HEP A filter .
• Filtered Exhaust – protects ambient environment, and avoids build up, air borne particles.
• The exhaust of Safety Cabinet is connected to the Virus Burn out Unit for product and personnel protection.
• Air is drawn through Pre-Filter and is made to pass through high effective HEP A filters.
• The efficiency of HEP A Filter is greater than 99.97% down to 0.3 micron.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica.
• OR Cold rolled steel duly powder coated OR Stainless Steel.
• Working table is made of Stainless Steel Sheet.
• Window opens to 20cm±5mm working height with predefined locking device.
• Built in U.V . Germicidal light – facilitates sterilization of working area before and after use.
• Cock – for gas, air or vacuum, (only 1 no.) is provided.
• Working area is illuminated by fluorescent lighting fitted to the unit.
• The blower and motor assembly is statically and dynamically balanced of 1/5 H.P. capacity operates with minimum noise level.
• Height of the working table provides comfortable SIT DOWN working position for the operator .

Additional Information:

Item Code: AM9007

Product Details:

Applications of Biosafety Cabinet :

• Bio safety Biological Safety Cabinet Class II re-circulates 70% of air through HEPA filter & 30% Exhaust
• Bio safety Cabinet is used to protect personel, product and the environment from exposure to biohazards and cross contamination during routine procedures.
• Used for various applications in the life science, clinical, pharmaceutical and industrial laboratory.
• These Cabinets are designed to provide 3 basic types of protection.
• Personnel protection from harmful agents inside the cabinet.
• Product protection to avoid contamination of the work, experiment or process.
• Environment Protection

Salient Features & Construction of Biosafety Cabinet :

• Low Cost.
• Low Noise.
• User Friendly Ergonomic Design.
• Controlled Environment Particulate Free Product Protection.
• Work area surrounded by negative pressure, double wall plenums for protection.
• Aerodynamic designed airflow grille maintains safety by preventing blockage.
• Silent Vibration
• Free Blower ensure noiseless operation.
• Sound level no more than 65 dbA.
• The Unit is suitable for CLASS 100 conditions.
• 70% of the air is re-circulated through the HEPA filter.
• The contaminated air is drawn by the blower through the plenum of the cabinet.
• 30% of the air is exhausted from work area.
• Filtered Exhaust - protects ambient environment, and avoids build up, air borne particles.
• The exhaust of Safety Cabinet is connected to the Virus Burn out Unit for product and personnel protection.
• Air is drawn through Pre-Filter and is made to pass through high effective HEPA (High Efficiency Particular Air) filters.
• The efficiency of HEPA Filter is greater than 99.97% down to 0.3 micron.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel (SS-304) (as ordered).
• Working table is made of Stainless Steel Sheet (SS-304 grade).
• Window opens to 20cm±5mm working height with predefined locking device.
• Built in U.V. Germicidal light
• Facilitates sterilization of working area before and after use. Cock - for gas, air or vacuum, is provided.
• Working area is illuminated by fluorescent lighting fitted to the unit.
• The blower and motor assembly is statically and dynamically balanced of 1/5 H.P. capacity operates with minimum noise level.
• Height of the working table provides comfortable SIT DOWN working position for the operator.

Additional Information:

Item Code: AM9006

Product Details:

Applications of Vertical Laminar Air Flow:

• Laminar Air Flow Benches Vertical are designed so as to meet the requirement of US Federal Standard 209 B providing particle free air to meet class 100 conditions mainly used for various works that require maintenance of the cleanness and purity.
• It is Ideal for Culture analysis, Bacteriological & Biological applications in Hospitals, Plant Tissue Culture, Labs, Food, Beverage and Electronic industries.
• It provides an economical work environment- suitable for hospitals, drugstore, pharmaceuticals factories, sanitation and anti-epidemic stations.

Salient Features & Construction of Vertical Laminar Air Flow:

• Low Cost.
• Low Noise.
• User Friendly Ergonomic Design.
• Controlled Environment Particulate Free Product Protection.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel.
• Working table is made of Stainless Steel Sheet
• All interior surfaces are epoxy painted filter seat is carefully formed, installed and checked for leakage.
• Side panels & front doors are made of 6 mm thick acrylic transparent plexi glass.
• The highly efficient HEPA filter maintains the optimum cleanliness and purity.
• The pre-filter fitted extends the life of HEPA filter drastically. Air drawn through pre-filter is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger.
• Working area is illuminated by fluroescent lighting fitted to the unit.
• The blower and motor assembly is statically and dynamically balanced of 1/5 H.P. capacity operates with minimum noise level.
• Height of the working table provides comfortable SIT DOWN working position for the operator.

Optional Features of Vertical Laminar Air Flow :

Additional Information:

Item Code: AM9001

Product Details:

Description:

Horizontal Laminar Air Flow Chamber that finds it applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters and ensure smooth functionality.

Technical Specifications:

• Direction of flow: Horizontal
• Cleanliness: CLASS 100
• Velocity: 90 FPM + / -20%
• Hepa Filter: Size and QTY. will depend on the Size selected
• Particle retention: Above 0. 3 micron
• Blower Assembly: 1 / 3 HP, 1440 RPM
• Noise level: 65 decibel + / -5%
• Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM)
• Vibration level: < 2. 5 micron

Additional Information:

Item Code: AM9010

Product Details:

Applications of Tissue Culture Hood :

• Tissue Culture Hood / Innoculation Chamber are most suitable for circulation free environment to eliminate cross contamination in sterile techniques involving culture growth, tissue staining and virus harvesting.
• The convenient working height of table top and ample working space provides working ease for uses while media preparation. Working table top made out of thick stainless steel sheet.
• The front door is made of thick transparent plexi-glass and has arrangement for keeping the door open if desired. All units are fitted with one U.V. germicidal light and one fluorescent light for daylight vision. is involved in rendering a wide gamut of Tissue Culture Hood / Inoculation Chambers that is manufactured using state of the art and latest technology with the set universal standards.
• These products are tested against various parameters under the strict supervision of our adroit professionals to ensure flawless deliveries. In addition to this, these chambers can also be customized as per various specifications from our esteemed customers.

Salient Features & Construction of Tissue Culture Hood :

• Suitable for hospitals.
• Between the outer and inner body wool is stuffed for insulation and for the prevention of thermal loss
• Door Gasket is provided for proper sealing along with heavy hinges and door closing device
• Heating elements are made up of high quality Nichrome
• Kanthal wire are embedded around the chamber
• Supplied with 1 (or) 2 removable shelves
• Temperature is controlled by Electronic Digital temperature indicator and is fitted in front for easy visibility
• Temperature is displayed on digital LED
• Front panel beside the temperature display also includes the ON/OFF switch

Additional Information:

Item Code: AM9003

Product Details:

Applications of Pass Box Static :

• Pass Box is used for transfer of material from and into the clean room, without contaminating the air of clean room and without having to open room door.
• This is achieved with the help of interlocking type doors of pass box.

Salient Features & Construction of Pass Box Static :

• Interlocking type doors.
• Can be installed easily on the wall between the clean room and any other room.
• Fitted with glass viewing window through which material kept in the pass box can be seen.
• Hinged door on both sides with wide glass viewing window.
• Electrically interlocked type doors on both sides, so that any one door can be opened at a time.
• UV & fluorescent light and HEPA filter can be provided optionally.

Working Principle of Pass Box Static :

This equipment is installed on the wall between the clean room and the other room. The pass box has two doors at its extreme ends. One door opens in the clean room and other door open in the other room. These doors are electrically interlocked type so that any one door can be opened at a time. This avoids direct flow of air from the clean room to the other room or vice versa. This also obviates the need to open the clean room door frequently for transferring of material from & into the clean room. Thus, it helps in achieving the aim of material transfer without disturbing the cleanliness level of the clean room.

Specification:

Optional Features of Fume Hood :

Additional Information:

Item Code: AM9005

Product Details:

Applications of Garment Storage Cabinet :

• Clean Air Garment Storage Cabinets are manufactured in a way that they have the highest degree of safety for both the users and the products with highly efficient HEPA filters are found in the cabinets.
• All the Clean Air Garment Cabinet are carefully constructed and tested as per the requirements of our esteemed clients. There is also high degree of customization according to the requirements of our customers.
• Clean Air Garment Cabinet makes a positive contribution in maintaining the cleanliness of our customers controlled clean-room environment.
• Clean Air Garment Cabinets are equipped with a blower and a HEPA filter in a fully contained enclosure constructed of powder coated MS Steel sheet which do not shed particles (or) contaminate the environment
• The main function Clean Air garment cabinet is to remove the particulate contamination from the garments as they are stored and removed.

Salient Features & Construction of Garment Storage Cabinet :

• Outer Chamber is made up of MS powder coated
• The inner chamber is made up of Stainless Steel.
• Between the outer and inner body wool is stuffed for insulation and for the prevention of thermal loss
• Door Gasket is provided for proper sealing along with heavy hinges and door closing device
• Heating elements are made up of high quality Nichrome
• Kanthal wire are embedded around the chamber
• Supplied with 1 (or) 2 removable shelves
• Temperature is controlled by Electronic Digital temperature indicator and is fitted in front for easy visibility
• Temperature is displayed on digital LED
• Front panel beside the temperature display also includes the ON/OFF switch

Additional Information:

Item Code: AM9002

Product Details:

Applications of Air Shower:

• Air Shower is a specialized chamber incorporated either as entryways of laboratories and other controlled environments to reduce particle contamination kept before the exit of a highly infectious place to stop the contamination.
• Air showers utilize high-pressure, HEPA- or ULPA-filtered air to remove dust, fibrous lint and other contaminants from personnel or object surfaces. The forceful "cleansing" of surfaces prior to entering clean environments (or) leaving contaminated environment reduces the number of airborne particulates introduced.
• manufactures this highly complex and technically advance variant of Air Shower. Not too many companies in the world manufactures Air Showers which requires very high level of technical expertise.
• Air Shower come with interlocking mechanism which prevent the 2 doors to open simultaneously at the same time. Thus preventing the contaminated air from entering inside the Air shower chamber.
• Air showers are frequently used in research laboratories around India and are exported to the worldwide market mainly American and European markets.

Salient Features & Construction of Air Shower:

• Outer Chamber is made up of MS powder coated
• The inner chamber is made up of Stainless Steel.
• Between the outer and inner body wool is stuffed for insulation and for the prevention of thermal loss
• Door Gasket is provided for proper sealing along with heavy hinges and door closing device
• Heating elements are made up of high quality Nichrome
• Kanthal wire are embedded around the chamber
• Temperature is controlled by Electronic Digital temperature indicator and is fitted in front for easy visibility
• Temperature is displayed on digital LED
• Front panel beside the temperature display also includes the ON/OFF switch

Additional Information:

Item Code: AM9008

Product Details:

Product Description

Dynamic Pass Boxes offered by us are used for the transfer of material from one area to another in isolation by means of mechanical/electromagnetic door interlocking process that ensures opening of only one door at a time. This process helps in avoiding cross contamination between two areas.

Operations:

• Material to be transferred from one place to another is placed within hatch from one end & door is closed
• The material can be lifted from other end from the hatch
• The interlocking of doors ensures only one door to be opened at a time

Construction:

• Units are factory assembled & made up of S. S. 304 grade Stainless Steel material
• These units have smooth welded corners

Blowers:

• These feature direct driven statically & dynamically balanced blower assembly with volume control damper that is used for air circulation within the cabinet
• Easy access is also provided to blower compartment

Additional Information:

Item Code: AM9009